Common problems in stainless steel plate processing

  How to cut the stainless steel plate processing?

  Under normal circumstances, the processing of stainless steel plates is done by cutting or plasma cutting, sawing and other technologies. When cutting, it should be isolated from the feeding support, and the drop hopper should be covered with rubber pads to avoid scratches. After plasma cutting, the slag should be cleaned up. The clamping should be protected by rubber when sawing and cutting, and the oil and residue on the workpiece should be cleaned up after sawing.

  What is the machining of stainless steel plate?

  Stainless steel parts should also be protected during machining such as turning and milling. After the operation, the oil stains, iron filings and other sundries on the surface of the workpiece should be cleaned up.

  What is the forming process of stainless steel plate?

  In the process of rolling and bending, measures should be taken to avoid scratches and creases on the surface of the stainless steel plate.

  In addition, when processing stainless steel plates, welding techniques such as riveting, welding, multi-layer welding, welding seams, and orthopedics are also used. Need to pay attention to the following points:

  1, When the stainless steel parts are assembled, avoid compulsory assembly, especially avoid flame roasting assembly.

  2, the oil, rust, dust and other sundries must be carefully solved before the welding of stainless steel parts;

  3, the surface of the weld shall not have defects such as slag, pores, undercut, spatter, cracks, lack of fusion, incomplete penetration, etc.

  4, For the correction of stainless steel parts, flame heating methods should be avoided;